SATA - 維基百科，自由的百科全書 SATA 1.5Gb/s [編輯] SATA 1.5Gb/s為第一代SATA介面，坊間的非官方名稱為SATA-1 [1]，傳輸速度為1.5Gbit/s。 SATA 3Gb/s [編輯] SATA 3Gb/s在2004年正式推出，坊間的非官方名稱為SATA-2（SATA-II），符合ATA-7規範，傳輸速度可達3.0Gbit/s。
SATA - 維基百科，自由的百科全書 - Wikipedia SATA 6Gb/s 在2009年5月26日SATA-IO完成SATA 3.0最終規格 ... 可相容舊有的 SATA裝置、改良傳輸訊號技術，亦大幅減低了SATA2.0 ...
Serial ATA - Wikipedia, the free encyclopedia However, high-performance flash drives can exceed the SATA 3 Gbit/s transfer rate; .... devices such as 1.8" SATA drives, some DVD and Blu-ray drives, and mini SSDs. ... Pin #, Mating, Function. —, Coding notch. 1, 3rd, 3.3 V. 2, 3rd. 3, 2nd.
Is A SATA 3Gb/s Platform Still Worth Upgrading With An SSD? - Are ... 21 Apr 2013 ... Today's fastest SSDs already bounce off the SATA 6Gb/s interface's throughput ... than conventional media (tens of thousands versus a couple hundred). .... II SSD to a PCIe SSD (Revo 3) and as long as you are on SATA II or ...
SATA 3.0Gb/s vs SATA 6.0Gb/s [Solved] - Hard Drives - Storage ... on a PC if the mobo has got the ports to support 6.0 Gb/s and all other specifications of ...
SATA Rev III (6.0 Gb/s) Drive on SATA II (3.0 Gb/s) port [Solved ... For example, a SATA III drive capable of 7200 RPM is the ideal drive these days, but ...
How do you use the SATA 6.0Gb/s ports - Asus - Motherboards - Tom ... How can I get my hard drive to work in the SATA 6.0Gb/s port? More about : sata 0gb ...
SATA Rev III (6.0 Gb/s) HDD problems on SATA II (3.0 Gb/s) port - Hard Drives - Storage I know other people have raised the question, but here it is. I have a Seagate Barracuda SATA 6 Gb/s - 2.0 TB on a Asus P5Q-E (with SATA Rev II ports) and the drive disconnects after a few minutes while copying huge amounts of data. It reappears after reb
Using Sata 6.0 Gb/s on 3.0 Gb/s port - Computer Forum I am thinking about buying this WD caviar black hard drive but I am not sure if it will work with my computer. I have a motherboard with Sata 3.0 Gb/s ports and this drive is Sata 6.0 Gb/s. Should I buy this drive or is it a better idea to get a 3.0 Gb/s
Is SATA2 hdd backwards compatible with 6.0 Gb/s ports? My board is an Asus P7P55D E-LX with 6xSATA 3.0 Gb/s ports configured in default IDE mode and 2xSATA 6.0 Gb/s ports supporting Marvell PCIeSATA 6Gb/s controller configured in ACHI mode. I have 1xSATA3 hdd connected to the 6Gb/s port and 1xSATA2 ...
